Snow-covered industrial warehouse exterior with cleared walkways and loading areas, illustrating winter warehouse safety.

Winter Warehouse Safety is a Shift-by-Shift Job

By

Ryan Hannam

| November 17, 2026

A warehouse entrance can be clear when the morning shift arrives and slippery an hour later. Snow carried inside melts near the doorway. Outside, runoff freezes as temperatures fall. The plow has already left, but the conditions employees encounter have changed. 

Losing footing has real consequences.

In data released in January 2026, the U.S. Bureau of Labor Statistics reported 479,480 private-industry cases involving days away from work because of falls, slips, and trips during 2023–2024. Those cases resulted in a median of 13 days away from work. The figures cover all seasons and private industries, rather than winter warehouses alone, but they illustrate the consequences of losing safe footing. 

For manufacturers, industrial shippers, and retail distributors, winter warehouse safety also affects whether materials can reach their destination, and finished goods can leave on schedule. Preparation establishes the starting point, but repeated checks keep that preparation useful as weather and workloads change. 

Why winter checks matter 

Winter hazards don’t stay where the last inspection found them. A plow can leave snow near an emergency exit, and meltwater can collect at a dock. Darkness can make an untreated patch between an employee’s vehicle and the building difficult to see. 

That’s why a seasonal inspection needs a consistent and recurring process behind it. OSHA’s walking-working surfaces standard requires regular inspections and additional inspections as necessary. Hazards must be corrected before the surface is used again or guarded if immediate correction is not possible. 

Doing a check at the start of each shift creates a practical handoff. After snowfall, drifting, thawing, or refreezing, further checks address conditions that develop between those handoffs. 

your reliable 3pl partner

The areas that need attention 

The inspection route should follow where people work and travel, including front entrances, parking areas, and secondary exits. 

Area What winter checks should cover 
Walkways, steps, and parking areas Snow and ice, full-width access on steps, lighting, and paths between vehicles and entrances. 
Entrances and interior floors Tracked-in slush, meltwater, secure mats, cleanup, and temporary warnings while hazards are addressed. 
Truck docks and trailers Ice on access surfaces, dock plates, and trailer floors; confirmation that trailer securement follows the site’s approved procedure before entry. 
Rail docks, pits, and spur Flangeways, switches, and derails cleared before each scheduled service and after heavy snow or freezing; safe footing on walkways and in pits; requirements confirmed with the serving railroad.
Emergency and fire-protection access Exits that open freely, clear discharge paths, and access to hydrants, post indicator valves, and wall valves. 
Roof edges and overhangs Falling-ice hazards above walkways and work areas, with assessment and removal assigned to qualified personnel. 

Access checks also support emergency readiness. OSHA requires that all exit routes remain unobstructed and emergency safeguards in proper working order.  

Cold exposure needs attention, too. OSHA’s cold-stress guidance recommends training, monitoring workers, and frequent short breaks in warm, dry areas. It’s essential for yard employees and anyone repeatedly moving between indoor and outdoor work to have appropriate clothing and footwear. 

Who is usually responsible for warehouse safety checks in winter? 

Winter safety work can involve warehouse supervisors, maintenance personnel, building owners, and outside contractors. It’s critical to know who performs a task and who confirms that the area is ready for use. 

WSI’s winter protocols call for a designated person on each shift to check conditions and take action. The seasonal facilities reminder also clarifies contractor coverage from site responsibilities: snow vendors generally clear the lot and shovel main entrances at most facilities, while the facility remains responsible for other exits and keeping them clear during prolonged snowfall. 

The same reminder assigns facilities responsibility for keeping fire-protection access clear. It also calls for checking ice-melt supplies, testing snow blowers, and reporting heating problems through maintenance requests. 

At leased or customer-owned buildings, those boundaries need to be confirmed for the individual property. The lease, service agreement, and snow-removal scope should identify responsibility for parking areas, sidewalks, roof ice, and after-hours response. The shift team still needs a clear contact when a hazard appears between contractor visits. 

When an outside operator runs the warehouse 

Shippers evaluating a warehouse operator should look at whether more than just a snow-removal contract exists. It’s more useful to look at how the operator identifies changing conditions and follows an issue through to resolution. For example: 

  • Who is named on each shift to run the checks? There should be coverage for nights, weekends, and absences, with a clear escalation contact. 
  • Is there a written checklist, and how are issues recorded and closed? A record should identify the location, action taken, person responsible, and any unresolved condition passed to the next shift. 
  • Who handles snow removal, roof ice, and parking areas? The answer should identify contractor, property owner, and warehouse responsibilities, including repeat visits during extended storms. Roof work needs an appropriate assessment and qualified resources. OSHA advises considering methods that avoid roof access and planning safe removal procedures. 
  • How is the rail spur kept serviceable? The operator should know the serving railroad’s winter requirements and clear the track components, as well as the yard around them, before each scheduled service. Even a small amount of packed snow or ice can keep switches and derails from working properly, which raises the risk of derailments, injuries, and service delays. Railroads publish specific expectations. Requirements vary by railroad, so the details should be confirmed with the one serving the site. CN’s Customer Safety Handbook, for example, asks customers to:
    • Clear flangeways of snow, ice, and debris to at least 1.5 inches deep and 3 inches out from the rail, especially at crossings.
    • Clear switches around and below the handles, between open switch points and stock rails, and in the four-foot area between the rails. A switch broom is the preferred tool, and hands or feet should never go between switch points.
    • Keep derails and their signs visible, with both sides cleared so the derail can open fully and crews have safe footing.
  • How does the operator report winter issues to the customer? Communication should explain the affected activity, expected service impact, interim arrangements, and next update, including when a safe reopening time is not yet known. 

Good answers connect a named person with a documented process. They explain who checks an area, who can arrange corrective work, and how unresolved hazards are handed over.  

Use a winter warehouse safety checklist 

A checklist can organize the work into three points: preparation before the first freeze, checks on every shift, and reassessment after storms, thaws, and refreezes. It includes space to record issues and actions, along with supervisor review. 

The form should be adapted to the building and freight. A rail-served facility has different access concerns from a truck-only warehouse. Sites with temperature-sensitive inventory or freeze-exposed fire-protection systems need additional procedures suited to those risks. 

Winter readiness depends on what happens after a hazard is noticed. Clear responsibility and a reliable handoff help ensure that yesterday’s preparation continues to protect the people and freight moving through the building today. 

Learn more about a reliable midwest partner

About the Author

Ryan Hannam

Ryan Hannam serves as Director of Operations and Corporate Safety at WSI, where he oversees the company safety programs and operations across six facilities in Wisconsin. He has been with WSI since 2006 and brings nearly three decades of experience in warehouse operations, safety management, and corporate safety leadership. Before joining WSI, Ryan held safety and warehouse management roles at Sysco Asian Foods and Sysco Foods of Eastern Wisconsin. He began his career in safety engineering at Briggs & Stratton. Ryan holds a degree in Safety from the University of Wisconsin-Platteville.